Home Cinema Installations and Sounds Transmission Through Doors

The reference level of ones soundtrack is 105db and 115db for the LFE channel. Most people would find these levels quite high, but not difficult to listen to, in a correctly designed home cinema room.

A problem occurs though, when we face the challenge of keeping instantly inside the cinema room. In residential installation, quite often we find bedrooms and other living areas to be right next towards the home cinema room. Special room construction techniques allow us to build a sufficient noise barrier, in order to reduce any sound transmission on the adjacent rooms.

However, doors constantly been the weakest point, in this attempt. The mass, damping and stiffness of the home cinema door determines its resistance towards passage of any sound waves. A door’s ability to relieve noise is offered by its Sound transmission Class. This means, the higher inside the Class the better the efficiency.

One more problem arises though; Sound waves can traverse any opening with very little loss. And to top it off, a tiny hole in a barrier would transmit almost as much sound like a much larger golf hole. This acoustic property of sound could be a problem in a small cinema installation, where high quality construction is required. In the area where acoustical gaskets come into game. A Home Cinemas Hertfordshire cinema door, in an effort to be effective, the seals around the head, jamb and sill must be complete and air-tight.

In other words, the standard of of the acoustical gasket in a real estate cinema installation, would see how close a lot more sound performance of the door, arrives to the published requirements. A hi-end home cinema design should take the information into consideration, to ensure a hi-end acoustical end result.